Peroxymonosulfate Improves the Activity and Stability of Manganese Oxide for Oxidation of Arsenite to Arsenate     

Yong Liu  Fen Zhang  Jingtao Hou  William Hartley 《洁净——土壤、空气、水》2020,48(2)

Manganese oxide has been widely investigated for oxidation of arsenite (As(III)) to arsenate (As(V)) due to its high redox potential; however, it becomes extremely unstable after reuse. Here, As(III) oxidation activity and stability of manganese oxide in the presence of peroxymonosulfate (PMS) is investigated. Batch experimental results reveal that manganese oxide/PMS exhibits high catalytic activity for As(III) oxidation compared to manganese oxide or PMS alone. Addition of PMS to manganese oxide not only reveals long‐term stability for As(III) oxidation, but also shows high As(III) oxidation activity in the presence of coexisting ions such as As(V) and phosphate. Quenching tests reveal that As(III) oxidation in the manganese oxide/PMS system is attributed to activation of PMS by manganese oxide at different oxidation states (Mn(III) and Mn(IV)), and the generation of sulfate radicals that are responsible for As(III) oxidation.  相似文献   

Groundwater contaminant source identification based on iterative local update ensemble smoother          下载免费PDF全文

YANG Ai-lin  JIANG Si-min  LIU Jin-bing  JIANG Qian-yun  ZHOU Ting  ZHANG Wen 《地下水科学与工程》2020,8(1):1-9

Identification of the location and intensity of groundwater pollution source contributes to the effect of pollution remediation, and is called groundwater contaminant source identifcation. This is a kind of typical groundwater inverse problem, and the solution is usually ill-posed. Especially considering the spatial variability of hydraulic conductivity field, the identification process is more challenging. In this paper, the solution framework of groundwater contaminant source identification is composed with groundwater pollutant transport model (MT3DMS) and a data assimilation method (Iterative local update ensemble smoother, ILUES). In addition, Karhunen-Loève expansion technique is adopted as a PCA method to realize dimension reduction. In practical problems, the geostatistical method is usually used to characterize the hydraulic conductivity feld, and only the contaminant source information is inversely calculated in the identifcation process. In this study, the identification of contaminant source information under Kriging K-field is compared with simultaneous identification of source information and K-field. The results indicate that it is necessary to carry out simultaneous identification under heterogeneous site, and ILUES has good performance in solving high-dimensional parameter inversion problems.  相似文献   

岩溶水硝酸盐污染原位修复试验     

叶进霞  夏春英  卜鸿志 《中国岩溶》2020,39(2):173-179

岩溶含水层的极不均一性特征使岩溶水溶质运移受构造、裂隙空间及其发育方向控制；因环境条件复杂，开展岩溶水污染原位修复技术难度较大，截止目前，国内尚未系统地开展岩溶含水层水污染原位修复研究工作。文章选择鲁中南山区典型岩溶发育及硝酸盐污染地段，施工组合钻孔建设修复试验工程，采用“乙醇+葡萄糖”液态碳源和“聚乙烯醇+淀粉颗粒”固态反应器分别进行岩溶水硝酸盐污染原位修复试验。结果表明:浓度500 mg?L－1、1 000 mg?L－1的“乙醇+葡萄糖”反硝化溶液对硝酸盐浓度的降解率分别为6.45 %和21.52 %；单位长度组成材料“聚乙烯醇3 kg+淀粉颗粒3 kg”、“聚乙烯醇2 kg+淀粉颗粒4 kg”的两种反硝化固态反应器对硝酸盐浓度的降解率分为33.91%和34.96%。试验证明在裂隙型岩溶地区采用孔组方案进行地下水污染原位修复技术可行、且能取得较显著效果。修复工程布设方式和试验成果对类似地区开展岩溶地下水污染原位修复具一定借鉴意义。   相似文献   

Spatial and Temporal Distribution of Dust‐Bound Trace Metal Elements around Kuhdasht Watershed Area in Iran     

Hamid Alipour  Ahmad Jalalian  Naser Honarjoo  Norair Tommanian  Fereidoon Sarmadian 《洁净——土壤、空气、水》2019,47(10)

Dust, as a source of trace metal elements, affects the health of society. The spatial and temporal concentrations of dust‐bound trace metals (Cd, Pb, Ni, Zn, Cu, and Mn) in Kuhdasht watershed (456 km²), Lorestan Province, Iran, is investigated. Dust is collected using glass traps placed in ten research stations in the region. The spatial and temporal distribution of dust trace metals are plotted using ARC‐GIS. The highest and the lowest concentrations of Zn (9751150 mg kg^?1), Pb (46.352.9 mg kg^?1), and Cd (2.443.30 mg kg^?1) are obtained in winter, of Ni (98110 mg kg^?1) and Cu in autumn (16.053.5 mg kg^?1), and of Mn in summer (385505 mg kg^?1). The spatial concentrations of dust‐bound trace metals indicate all, except Cu, show a decreasing trend from the mountains toward the plains, similar to that of soil and of dust, except for Zn, which shows higher concentrations in dust than in soil. The potential sources of dust‐bound trace metals and their rate of contamination are also investigated using the enrichment and contamination factors. The major sources of Cd and Zn in the dust of watershed are due to anthropogenic activities or from activities outside the borders.  相似文献   

新型珊瑚海水混凝土力学性能试验研究   总被引：2，自引：1，他引：1  

吴彰钰  余红发  麻海燕  章艳  梅其泉  达波  谭永山  华实 《海洋工程》2018,36(3):59-68

为了解决全珊瑚海水混凝土(coral aggregate seawater concrete,简称CASC)的脆性问题,采用碱式硫酸镁水泥(basic magnesium sulfate cement,简称BMSC)为胶凝材料和剑麻纤维为增韧材料制备了一种新型全珊瑚海水混凝土(NCASC),系统测定了基本力学性能,并与普通硅酸盐水泥制备的CASC、碱式硫酸镁水泥砂石混凝土(basic magnesium sulfate cement concrete,简称BMSCC)、普通砂石混凝土(ordinary portland cement concrete,简称OPC)以及普通轻骨料混凝土(lightweight aggregate concrete,简称LAC)的力学性能进行对比。结果表明:立方体抗压强度(f_(cu),m)在15~35 MPa范围内的NCASC的轴心抗压强度(f_c,m)、劈裂抗拉强度(f_(sp),m)与f_(cu),m之间具有较显著的线性关系;对于f_(cu),m为15~35 MPa的混凝土,相同强度NCASC的f_c,m高于OPC、LAC及BMSCC,其f_c,m与f_(cu),m比值最大,大致在0.85~0.96之间,NCASC的f_(sp),m比OPC和LAC高,但比BMSCC低,且随着强度的提高,OPC与NCASC的f_(sp),m间的差距在增大,而LAC和BMSCC与NCASC的f_(sp),m间的差距在缩小;在强度等级C15~C55的范围中,NCASC和CASC的f_(sp),m、f_c,m与f_(cu),m之间的关系基本可以采用相同的线性回归方程来描述,利用这两个回归线性方程得到对应于标准强度等级的CASC和NCASC的f_(sp),m和f_c,m数据,为CASC力学性能研究与结构设计提供参考依据。  相似文献   

离子色谱法测定海水中氯离子和硫酸根离子     

王丕波  曾艳敏  闫晶  殷丽娜  任登龙 《海洋科学》2020,44(11):52-56

氯离子和硫酸根离子是海水中重要的无机阴离子，在研究海洋生态变化、海洋循环作用过程与海洋全球气候变化等领域具有重要的指示意义。其测定方法较多，但缺少相应的测试方法。本文对测定海水中Cl^-，SO₄^2-的离子色谱方法进行了优化，选用IonPacAS14碳酸盐选择性离子色谱柱，以3.5 mmol/L Na₂CO₃+1 mmol/L NaHCO₃为流动相，可消除海水样品中碳酸盐及其他阴离子的干扰。该方法对Cl^-检出限为0.29 mg/L，线性相关系数r²=0.999 2，对SO₄^2-检出限为0.42 mg/L，线性相关系数r²=0.997 9。样品的加标回收率在95%~102%，Cl^-和SO₄^2-的相对标准偏差分别为1.92%和4.18%。该方法简便、迅速、灵敏、准确度高，可满足批量海水样品中Cl^-与SO₄^2-的准确测试。  相似文献   

Investigation of gas content of organic-rich shale:A case study from Lower Permian shale in southern North China Basin,central China     

Wei Dang  Jin-Chuan Zhang  Xuan Tang  Xiao-Liang Wei  Zhong-Ming Li  Cheng-Hu Wang  Qian Chen  Chong Liu 《地学前缘(英文版)》2018,9(2):559-575

Measuring gas content is an essential step in estimating the commerciality of gas reserves. In this study,eight shale core samples from the Mouye-1 well were measured using a homemade patented gas desorption apparatus to determine their gas contents. Due to the air contamination that is introduced into the desorption canister, a mathematical method was devised to correct the gas quantity and quality.Compared to the chemical compositions of desorbed gas, the chemical compositions of residual gas are somewhat different. In residual gas, carbon dioxide and nitrogen record a slight increase, and propane is first observed. This phenomenon may be related to the exposure time during the transportation of shale samples from the drilling site to the laboratory, as well as the differences in the mass, size and adsorptivity of different gas molecules. In addition to a series of conventional methods, including the USBM direct method and the Amoco Curve Fit(ACF) method, which were used here for lost gas content estimation, a Modified Curve Fit(MCF) method, based on the 'bidisperse' diffusion model, was established to estimate lost gas content. By fitting the ACF and MCF models to gas desorption data, we determined that the MCF method could reasonably describe the gas desorption data over the entire time period, whereas the ACF method failed. The failure of the ACF method to describe the gas desorption process may be related to its restrictive assumption of a single pore size within shale samples. In comparison to the indirect method, this study demonstrates that none of the three methods studied in this investigation(USBM, ACF and MCF) could individually estimate the lost gas contents of all shale samples and that the proportion of free gas relative to total gas has a significant effect on the estimation accuracy of the selected method. When the ratio of free gas to total gas is lower than 45%, the USBM method is the best for estimating the lost gas content, whereas when the ratio ranges from 45% to 75% or is more than 75%, the ACF and MCF methods, are the best options respectively.  相似文献   

Hydrothermal Dolomite: A Review and PerspectiveEI北大核心CSCD     

Li Q.  Bao Z. 《大地构造与成矿学》2018,(4):699-717

Hydrothermal dolomite commonly closely associates with oil-gas reservoirs and sediment-hosted Pb-Zn deposits, the Mississippi Valley-type (MVT) Pb-Zn deposits in particular. Host rocks of MVT deposits usually experienced extensive dolomitization, and indeed, hydrothermal dolomite is considered as a useful prospective indicator for MVT mineralization. However, genetic link between the hydrothermal dolomitization and MVT Pb-Zn mineralization is a matter of debate. This paper briefly reviewed the nomenclature and research history of hydrothermal dolomite, introduced the major geological, geochemical characteristics, and distribution of hydrothermal dolomite, spatial and possibly genetic relationship between hdyrothermal dolomite and hdyrothermal ore deposits and oil-gas reservoirs based on case studies including the occurrence of hydrothermal dolomites in MVT deposits in Southwest China. The temporal and genetic relationships between dolomitizaiton and thermal sulfate reduction, sulfide precipitation and thus the location of ore mineralization well worthy more attention, and comprehensive geological and isotope geochemical and state of art in situ techniques will contribute to understanding of the genesis of hydrotherml dolomite and the spatially related ore deposits and oil-gas reservoirs. © 2018, Science Press. All right reserved.  相似文献   

The source of sulfur in sulfide deposits in the Siberian Platform traps (from isotope data)     

V.V. Ryabov  O.N. Simonov  S.G. Snisar  A.A. Borovikov 《Russian Geology and Geophysics》2018,59(8):945-961

The source of sulfur in giant Norilsk-type sulfide deposits is discussed. A review of the state of the problem and a critical analysis of existing hypotheses are made. The distribution of δ³⁴S in sulfides of ore occurrences and small and large deposits and in normal sedimentary, metamorphogenic, and hypogene sulfates is considered. A large number of new δ³⁴S data for sulfides and sulfates in various deposits, volcanic and terrigenous rocks, coals, graphites, and metasomatites are presented. The main attention is focused on the objects of the Norilsk and Kureika ore districts. The δ³⁴S value varies from -14 to + 22.5‰ in sulfides of rocks and ores and from 15.3 to 33‰ in anhydrites. In sulfide-sulfate intergrowths and assemblages, δ³⁴S is within 4.2-14.6‰ in sulfides and within 15.3-21.3‰ in anhydrites. The most isotopically heavy sulfur was found in pyrrhotite veins in basalts (δ³⁴S = 21.6‰), in sulfate veins cutting dolomites (δ³⁴S = 33‰), and in subsidence caldera sulfates in basalts (δ³⁴S = 23.2-25.2‰). Sulfide ores of the Tsentral’naya Shilki intrusion have a heavy sulfur isotope composition (δ³⁴S = + 17.7‰ (n = 15)). Thermobarogeochemical studies of anhydrites have revealed inclusions of different types with homogenization temperatures ranging from 685 °C to 80 °C. Metamorphogenic and hypogene anhydrites are associated with a carbonaceous substance, and hypogene anhydrites have inclusions of chloride-containing salt melts. We assume that sulfur in the trap sulfide deposits was introduced with sulfates of sedimentary rocks (δ³⁴S = 22-24‰). No assimilation of sulfates by basaltic melt took place. The sedimentary anhydrites were “steamed” by hydrocarbons, which led to sulfate reduction and δ³⁴S fractionation. As a result, isotopically light sulfur accumulated in sulfides and hydrogen sulfide, isotopically heavy sulfur was removed by aqueous calcium sulfate solution, and “residual” metamorphogenic anhydrite acquired a lighter sulfur isotope composition as compared with the sedimentary one. The wide variations in δ³⁴S in sulfides and sulfates are due to changes in the physicochemical parameters of the ore-forming system (first of all, temperature and P_ch4) during the sulfate reduction. The regional hydrocarbon resources were sufficient for large-scale ore formation.  相似文献   

Geodynamic setting,structure, and composition of continuous trachybasalt-trachyandesite-rhyolite series in the north of Altai-Sayan area: the role of crust-mantle interaction in continental magma formation     

A.A. Vorontsov  O.Yu. Perfilova  N.N. Kruk 《Russian Geology and Geophysics》2018,59(12):1640-1659

The geologic positions and geochemical and isotope parameters of the Ordovician-early Silurian and Early-Middle Devonian continuous volcanic series of the Minusa basin and its mountainous framing are compared. Both series are composed mostly of moderately alkaline rocks with variations in SiO₂ contents from 45 to 77 wt.%. The Ordovician-early Silurian series differs from the Early-Middle Devonian one in lower contents of TiO₂ (< 1.7 wt.%) and Fe₂O_3tot and higher contents of Al₂O₃ in all rock varieties and in the more fractionated REE patterns of trachybasalts. The compositions of both series reflect two simultaneous mechanisms of magma evolution. The main process was fractional crystallization leading to the formation of rocks from trachybasalts to trachyrhyodacites. The accessory mechanism was the contamination of fractionated melts by crustal material, anatectic melting of crust, and mixing of deep-seated magmas with crustal melts. These processes had specifics at each stage and were controlled by the composition of the sources of parental melts. Their geochemical and isotopic parameters (high alkalinity, high contents of lithophile elements, negative anomalies of Nb, Ta, and Ti, and enrichment in radiogenic Sr) point to the interaction of mantle plumes with the lithospheric mantle that was metasomatically transformed during the preceding Vendian-early Cambrian subduction processes.  相似文献